How it Works
Tija sends light electrical pulses into the body through the skin via electrodes which are placed over peripheral nerves. The TENS unit works by sending high-frequency electrical signals that are both continuous and mild to block out the pain signals being delivered to the brain. The Tija device is designed with specific pulse frequency and pulse length that are suitable for its intended use. When these pain signals are halted, pain is not felt by the reactive area and the patient gets relief. Tija works in two ways
Gate Control Theory
This theory states that stimulation of nerves carrying non-painful sensations (called A-beta nerve fibers) closes a neurological “gate” in the spinal cord that reduces transmission from pain nerves (called A-delta and C nerve fibers) to the brain. By preventing pain signals from reaching the brain, the perception of pain decreases. An illustration of the Melzack and Wall theory is shown below :
Endorphin release
Endorphin release Tens drives the motor nerves to produce small repetitive contractions that help activate the natural pain control response by releasing beta endorphins and ease the pain felt by the patient.
No side-effects
Use it anywhere
Use for years
Using Tija
Set Up Device
Turn ON Tija
Enjoy Relief from Period Pain
Doctors who participated in Design and Development of Tija
Quick Use Guide
- Charge the device for 4hours before first use
- Connect the Electropad wire to the device and wear the device by clipping on the belt/ pocket.
- Remove the plastic film on the Electropads and place the electropad on each side of your lower tommy. The distance between electrodes should be 5-8 cm.
- Switch ON the device by pressing Button and change the intensity by - + button to comfortable level.
- You can wear the Electropads upto 7-8 hours and switch it ON / Off as per the pain sensation
- When not in use, remove the Electropads from the skin and place them on the disc provided for storage
- After 10-15 uses the Hydrogel will stop attaching firmly to your skin or the sensation is too weak even at higher intensities, replace the hydrogel pads.
- The Hydrogel pad has plastic film on both sides. One side film is cut in two halves . Remove the first half and place it on the electropad , then remove the 2nd half of the film to stick the hydrogel pad .